brand Longruner

Last updated: 18 Oct 2019, 00:23

One page on our website with products by 'Longruner':

The following products are available from 'Longruner':

For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc.
Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight).
After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
Measurement results represent by TFT graphic display(160x128). Support Chinese and English.
One key operation, Auto Power Off(Timeout Settable). Can also press the multi-functional button to close the detector.

Capacitive touch control and has vertical and Horizontal image flip function. Image 4: 3/ 16: 9 display format conversion.
Operating voltage: 12V 1a power supply current requirements within the above 2a, on board 400mA DC-DC Boost Regulator to provide power supply to LCD backlight.
Support 864 x 480 x 24bit Graphics content through SSD1963 controller. It also equips parallel MCU interfaces in different bus width to receive Graphics data and command from MCU. Its display interface supports common ram-less LCD driver of color depth up to 24 bit-perpixel. Warning: all data port voltage can not exceed 3.6V.
Supports BB black, comes with related images like: Angstrom. And also supports banana Pi/banana Pro, comes with related images like: lubuntu, Raspbian. We provided CD Disk with related driver and sauce code to you, If you are unsure about any of the technical issues.Please contact us freely.

 Latest CNC Shield Version 3.0 Compatible with ArduinoIDE.
 Compatible with ArduinoIDE UNOR3 Board, MCU: ATmega328, USB interface: ATmega16U2.
 PWM Spindle and direction pins. 4-Axis support. Runs on 12-36V DC.
 2 x End stops for each axis (6 in total).
 4Pcs A4988 Stepper Motor Driver with radiator.

This is Welded(Assembled), can use directly.
This oscilloscope was designed as a training oscilloscope. Circuit is simple, reliable, inexpensive.
With automatic, regular and one-shot mode, easy to capture the moment Waveform.
Adjustable vertical displacement, and with instructions. This opens the possibility for users to add different features or develop new applications on the hardware.
It has been pre-programmed and no re-programming required. Partially open-sourced.

【SIMPLE & EFFECTIVE】No batteries needed, plug and read. Easy to read moisture levels, including ten scales. Simply insert the probes into the soil about 3-5 inches,10 cm above the probe to be inserted, the most accurate measured.
【INDOOR & OURDOOR USE】Soil moisture meter let you know when to water. It's a necessary tool for outdoor & indoor plants, gardens, lawn, vegetables, etc. Compact and portable, convenient for indoor/outdoor use.
【HIGHLY ACCURATE】 Our soil meter is a combination of precision, accuracy and durability. Easy to read moisture, get the reading quickly, promotes healthy plants; Color coded reading system, from red, green to blue.
【IMPORTANT TIPs】 1, Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes; 2. Design for testing soil ONLY not for Water test; 3, After using, need to clean and wipe the probes.
【LIFETIME GUARANTEE】 - We believe in the quality of our soil test kit. If you have any problems, contact us freely and we support replacement and guarantee forever with 24 hours friendly customer service.

◈A full set watch repair kit 149Pcs◈ this watch repair kit are designed for both experiences watchmaker and beginners. It is a user-friendly watch repair kit and ideal kit with different tools to meet both your professional and general watch repairing needs.
◎Updated Version ◎ the 3 jaw Adjustable case back opener can open the watch case back from 20mm to 55mm. While the same openers from other seller can just have opening range of 20~37mm.
✿High quality & durable✿ most of Longruner watch repair tools are made of high quality solid 304 Stainless steel which can be last a long time. It is reusable, sturdy, portable, practical and very easy to use. There is a cleaning cloth with the kit which can be used to keep your watch and your tools clean.
■Detailed user manual provided■ we provide the detailed user manual on how to use Each of the watch repair tools, If you need the detailed user manual, Please fee free to contact us!
More fun & Friendly service❤ This watch repair kit is clean and functional. You will get full set watch repair kit and our 12-month warranty, friendly customer service. Buy with confidence!

Also see: