brand DIYmall

Last updated: 16 Nov 2019, 17:52

One page on our website with products by 'DIYmall':

The following products are available from 'DIYmall':

Driver ID: SSD1351, you can find SSD1351 library in github
Document link: https:/drive.google.com/file/d/0B8DSGdAr8_31YWhsa2V0cGpfRjg/view?usp=sharin
work with raspberry pi link: https:/www.raspberrypi.org/forums/viewtopic.php?t=126811&p=871760
Colors Driver IC:SSD1351
What you will get is: 1 X 1.5inch oled, any question please feel free to contact

When you test the GPS module, pls kindly note that you need test it in outdoor wide plain place, not indoor.
Document link: https:/engineersportal.com/blog/2018/5/9/comparing-iphone-gps-against-neo-6m-gy-gps6m-gps-module-with-arduino
Youtube link: https:/www.youtube.com/watch?v=VziqwqLaGso
LED signal indicator,With data backup battery
EEPROM power down to save the configuration parameters data

Support Windows Andorid Linux sytem, Raspberry PIand EMGRAND
Note: it can not work with IOS system
You need install the basic driver before you use it, Raspberry Pi and linux no need driver.
What you will get is : 1 X VK-172 G-mouse

Use Potentiometer 105, output timing is from 0.5S to 200S. Same product link https:/www.amazon.com/dp/B07CSM3K63
Reference links: https:/www.mysensors.org/build/motion
NOTE: On this retrigger jumper is a solder jumper, and you need solder it by yourself
Package Included: 5 X HC-SR501 PIR Infared Sensor

The screen is made in Taiwan, quality is much better. Compatible with MMDVM，Pi-Star, and it works with raspberry pi. https:/tech.scargill.net/ssd1306-with-python/
The IIC address can be changed,it is convenient to use with different machines
Four square holes are easy to install
Document link:https:/drive.google.com/open?id=0B8DSGdAr8_31UEItMmx6ZDJIOWs Datasheet link:https:/drive.google.com/open?id=16FdmMveOURZ_KeF_rOV_bWhavkiRB5WZ
What you will get is: 2 x 0.96inch oled blue&yellow,any question please feel free to contact us.

Support Google Earth，The gps module can work with windows, android and linux system, but it can not work with IOS system.
Note: Please install driver before use the gps module
Driver Link: https:/drive.google.com/open?id=0B8DSGdAr8_31WGhqM1liUUpjVlE
Rereference link: https:/www.instructables.com/id/GPS-Raspberry-Pi/
What You Get: 1 X USB VK-162 GPS Module, any question please feel free to contat.

Video link https:/youtu.be/M-bn7BE6qNA
Voltage:DC4-7V LED Chip:WS2812B
Communication interface:Single-wire communication
Note: The led ring doesn't come with cable, you can buy the cable from this link: https:/www.amazon.com/dp/B07KLM9KR1
What you will get is: 1 X 24Bits WS2812 5050 RGB LED Ring

Document link: https:/drive.google.com/open?id=1qkexPET5MUICAarGOtlnQk4F-JEKkrHZ
The screen is made in Taiwan, quality is much better. Compatible with MMDVM，Pi-Star, and it works with raspberry pi. https:/tech.scargill.net/ssd1306-with-python/
The IIC address can be changed,it is convenient to use with different machines
Four square holes are easy to install
What You Get: 1 X 0.96 White OLED Module.

Also see: