brand ERYONE

Last updated: 29 Dec 2019, 16:25

One page on our website with products by 'ERYONE':

The following products are available from 'ERYONE':

Print Temperature Range: 190°C-220°C 1) Different printer and filament ask different temperature, please print a temp tower first.)
High Quality: 1.75mm, tolerance +/- 0.05mm, N.W.: 1kg, Shipping weight 1.28kg
Tangle Free: Specially designed to reduce Tangling
Jam Free: Specially designed to reduce nozzle jams
for MK3 printer: 1) print temp tower, 2)clean metal extruder or add PTFE thorat.

Marble effect: marble PLA is a mixture of pure PLA and healthy&safety marble elements, which produces natural marble effect.
1.75mm in diameter and tolerance +/-0.05mm.
Recommended Extrusion/Nozzle Temperature 190°C - 220°C (374℉ - 428℉)
Marble 3D Printer PLA Filament Vacuumed Sealed With Desiccant
Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"

Like silk, Highlight shiny silky smooth appearance.
PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
Recommended Extrusion/Nozzle Temperature 190 - 230°C (374 - 435°F)

Rainbow like - Color circulation: Red-Orange-Yellow-Green-Teal-Blue-Purple-Red. The first color is random, maybe red, maybe not.
For color change effect, please print Large work. About 13~15m/color.
Professional Packaging | Vacuumed Sealed, 1.75mm and +/-0.05mm tolerance.
Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
If there is any problem with this item, please mesage us via amazon message.

Sparkly Galaxy Glitter infill, gypsophila sparkling pla filament, shiny bright surface
Natural Material, Non Toxic - Ideal for indoor printing.
Professional Packaging - Vacuumed Sealed with a desiccant bag
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"

Eryone Magnetic Flexible Heated Bed is compatible with Creality CR-10S, JG Aurora A5 and A5x, Geeetech A30, Folger FT-5, Tevo Black Widow and Tornado, Anet E12, TronXY X3s and X5SA, , Alfawise U20, Wanhao Duplicator 9, RAISCUBE T8 Lulzbot Taz 6, Hictop CR-10 and more 3D printer
No more tape, no more glue, no more shovel, and release your printing anxiety
Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off
How to clean? Please clean the dust with a soft cloth. Wipe the stains with over 95% strength alcohol gently.
Please re-level your bed after install this item. If the nozzle can touch the PEI, will destory PEI. Note: The temp of the bed should be below 75℃

Super quiet: Eryone 2560 Mother Board with TMC2208 V1.2 stepper motor driver and quite fans.
Maflex: magnetic and flexible PEI printing surface, easy stick to heat bed and remove from heat bed, for more detail, please see Eryone maflex.
Large volume and high quality: The printing volume is 300*300*400mm, with carefully-selected components. After 3 steps assembly, the printer can print pretty well, almost no need to calibrate.
Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print.
Compatible with Auto-leveling sensors: With pre-designed interface for BL-touch and proximity switch, update Eryone Thinker S firmware to enable the auto-leveling function is easily.

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.
The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; faster motor acceleration/deceleration than stealthChop, these are also designed because stealt
Compatible with existing 3D printer electronics, With a standard step/dir interface, it is easy to use. It can replace the original TMC2100 A4988 DRV8825 LV8729.
Major Features: UART configuration interface, CoolStep current dynamic adjustment technology, can save 70% of the energy; dcStep , stallGuard2 stall detection technology, Components on bottom PCB side for better heat emission; Automatic standby current rection.
Warranty: each one defective item can have the free replace or refund within 1 month, lifetime technical service.

Rainbow like: About 4~10m/color. Multicolor.
Raw Material is from USA, PLA - Ideal for indoor printing.
Professional Packaging | Vacuumed Sealed
1.75mm filament diameter (dimensional accuracy +/- 0.05mm). 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
Recommended Extrusion/Nozzle Temperature 195 - 215°C

BuyNo Reviews

Also see: